video gallery

• Prepare the Surface: Ensure the wall or surface where the PVC marble sheets will be applied is clean, dry, and smooth. Repair any cracks or uneven areas and allow them to dry completely.
• Measure and Cut: Measure the area where the PVC marble sheets will be installed and cut the sheets to the required size using a utility knife or saw. Be precise with measurements to ensure a perfect fit.
• Apply Adhesive: Spread an appropriate adhesive (usually a strong construction adhesive) evenly on the back of the PVC marble sheets or directly on the wall surface, following the manufacturer’s instructions.
• Install the Sheets: Carefully place the PVC marble sheets onto the prepared surface, aligning them properly. Press firmly to ensure good adhesion and smooth out any air bubbles or wrinkles.
• Finish and Clean: Allow the adhesive to cure as per the manufacturer’s recommendations. Once dry, clean the surface of the sheets to remove any adhesive residue or dirt. Inspect the installation to ensure all sheets are securely attached and there are no gaps or imperfections.

• Prepare the Surface: Clean and smooth the wall surface where the polymer panels will be installed. Fill in any holes or cracks and ensure the surface is dry and level to promote proper adhesion.
• Measure and Cut: Measure the dimensions of the wall and cut the polymer panels to the appropriate size using a utility knife or saw. Accurate cutting ensures a proper fit and alignment.
• Apply Adhesive: Apply a suitable adhesive or mounting glue to the back of the polymer panels or directly to the wall, following the manufacturer's instructions. Ensure an even application for a secure bond.
• Install the Panels: Position the polymer panels on the wall, aligning them carefully. Press each panel firmly into place to ensure good adhesion and eliminate air bubbles. Use spacers if necessary to maintain consistent gaps between panels.
• Finish and Clean: Allow the adhesive to set and cure as per the manufacturer's guidelines. Once fully cured, clean the panels with a damp cloth to remove any excess adhesive or dirt. Check for proper alignment and make any necessary adjustments.

1. Prepare the Surface: Ensure that the wall and floor where the baseboards will be installed are clean, dry, and smooth. Remove any old baseboards or debris, and repair any imperfections on the surfaces.
2. Measure and Cut: Measure the length of the walls where the baseboards will be installed and cut the polymer baseboards to the correct lengths using a miter saw or utility knife. Make precise cuts for a seamless fit, especially at corners.
3. Apply Adhesive: Apply a suitable construction adhesive to the back of the polymer baseboards or directly to the wall, following the manufacturer’s instructions. Ensure even coverage to create a strong bond.
4. Install the Baseboards: Position the baseboards against the wall and press them firmly into place. Use a level to ensure they are straight and properly aligned. If necessary, use finishing nails or screws to secure them further, making sure not to damage the panels.
5. Finish and Clean: Allow the adhesive to dry according to the manufacturer’s recommendations. Once dry, fill any gaps or nail holes with caulk or filler and smooth it out. Clean the baseboards with a damp cloth to remove any adhesive residue and ensure a polished finish.

• Prepare the Surface: Ensure the wall surface is clean, dry, and smooth. Remove any existing wall coverings, dirt, or debris. Repair any cracks or uneven areas to provide a proper foundation for the wall slats.
• Measure and Cut: Measure the dimensions of the wall and cut the polymer wall slats to the required lengths using a saw or utility knife. For precise installation, cut the slats according to the layout plan, including any necessary angles for corners.
• Apply Adhesive: Apply a high-quality adhesive suitable for polymer materials to the back of each wall slat or directly to the wall. Follow the manufacturer’s guidelines for adhesive application to ensure a strong bond.
• Install the Slats: Position the polymer wall slats on the wall, starting from one end and working your way across. Align each slat carefully, ensuring even spacing and proper alignment. Press each slat firmly into place to adhere securely and prevent gaps.
• Finish and Clean: Allow the adhesive to cure as per the manufacturer's instructions. Once the installation is complete, clean the wall slats with a damp cloth to remove any adhesive residue or dust. Inspect the installation to ensure all slats are securely attached and properly aligned.

• Prepare the Frame and Surface: Measure and prepare the door frame and wall where the hidden door will be installed. Ensure the surface is clean, smooth, and level. Install a door frame that accommodates the polymer panels and provides space for the hidden door mechanism.
• Cut and Fit Polymer Panels: Measure and cut the polymer panels to fit the dimensions of the door frame and wall opening. Ensure the panels align precisely with the frame and wall to maintain a seamless appearance.
• Install the Hidden Door Mechanism: Mount the hidden door hardware, such as hinges or sliding mechanisms, within the door frame. Follow the manufacturer’s instructions for proper installation to ensure the door operates smoothly and remains concealed when closed.
• Attach Polymer Panels: Apply adhesive to the back of the polymer panels or directly to the door frame. Attach the panels to the door frame, aligning them carefully to match the surrounding wall panels. Press the panels firmly into place and secure them as needed.
• Finish and Test: Allow the adhesive to cure as per the manufacturer's recommendations. Once dry, test the hidden door to ensure it opens and closes smoothly without any gaps or alignment issues. Make any necessary adjustments to the hardware or panels for a seamless, functional hidden door.

Polymer wall slats offer excellent water resistance, making them ideal for high-moisture areas like bathrooms and kitchens. Unlike traditional materials, polymer slats do not absorb water, preventing issues such as warping or swelling. Their water-resistant properties ensure they maintain their appearance and structural integrity even in humid conditions. Easy to clean and maintain, these slats can be wiped down without fear of damage from moisture. This durability against water makes them a reliable choice for both residential and commercial applications where moisture is a concern.